2003-2004 Cummins 650HP-700HP Power Package

Proven Cheetah Technology:

• Drop-In Replacement
• Lower EGT's
• 2.5" "Work Stock" Legal
• Stock Like Spooling
• Fleece Performance Exclusive FMW Compressor Wheel Technology
• Max Rear Wheel HP Rating: 650HP
• 40-45 PSI Operating Range

View product page

Note: 

• Atmospheric Turbo is sold separately. 

Features:

• Supports up to 750HP with stock Holset charger
• Over 1000HP with upgraded chargers
• Low profile 6061-T6 aluminum coolant overflow tank
• CNC machined and laser-cut flanges
• Fully TIG welded
• Full steel intermediate charge pipe
• HD 4-ply silicone couplers
• All hardware included
• Not compatible with the factory emission system
  

View product page

Features:

• Increase airflow for more power, response, and reliability
• Replaces your factory turbo with an S300 SX-E Borg Warner T4 flange turbo
• Kit includes a 5.9L 2-piece BD high flow pulse T4 manifold and gaskets
• It drops right in place for an easy, clean installation
• Comp Wheel: 61.44mm (2.42in) to 69.00mm (2.72in)
• Turbine Wheel: 76mm (2.99in) or 80mm (3.15in)
• A/R Ratio: 0.91, 1.00, or 1.10 depending on the application
• Flow: 77 Lb/min to 98 Lb/min
• Approximate rated 500hp - 700hp (depending on truck configuration)

View product page

• Supports up to 900RWHP
• 2-Year Unlimited Mile Warranty
• Brand New Injectors - No Core Charge
• 45% Over

View product page

Please select the 45% Option. 

Features:

• Built to the highest quality standards using industry-leading components
• Tested on the world’s best equipment by highly skilled technicians. 
• Requires a core deposit

View product page

Features: 

• Proven to support 750 RWHP
• Eliminates the factory fuel flow restriction that begins at 3,000 RPM
• Allows you to maintain desired fuel rail pressure through your entire RPM range
• Every CP3 has been tested in Fleece's engine simulator and pump test stand to simulate real-world situations

View product page

• OEM+ up to 14mm high-performance units
• Proven motorsports history
• Optimize your engines ability 

View product page

Features:

• Power Rating: 600 - 900HP
• Preset Fuel Pressure: 16-18PSI
• Flow Rating: 165GPH
• Filter Life Expectancy: 30,000 Miles
• Filtration Rating: 3 Micron
• Warranty: Limited Lifetime Warranty

View product page

Features:

• 104lb Valve Springs
• Includes (24) Valve Springs
• Must-have for performance enthusiasts running 50PSI or greater 

View product page

Features:

• Triple Shot Peened & Stress Relieved
• 103lb Springs
• Handles Over 50PSI of Boost
• 180lb Nose Pressure
• Sold as a Set

View product page

*Recommend* 

Features:

• Push Rod Specs: 3/8" x .120 wall intake pushrod and a 7/16" .120" exhaust pushrod.
• If you are over 750hp with your ISB, the cylinder pressures dictate that you step up to Smeding Diesel's extreme duty

View product page

Features:

• Handles Over 750HP
• Stronger & More Reliable than OE
• Complete Set (varies on inventory levels at the time)
• 3/8" .095 Wall Intake Pushrod & 7/16" .120 Exhaust Pushrod
• Or 
• 12mm diameter .120" wall throughout

View product page

ARP Pro Series cylinder head studs are cold-forged to ensure molecular integrity.

Features:

• The only fastener to trust in your build
• 12 Point Heads
• Black Oxide Finish
• 220,000 PSI Tensile Strength

View product page