2003-2004 Cummins 650HP-700HP Power Package
Note:
You will require a built transmission to handle the added power from this package.
Tune Revisions:
Fleece 63mm FMW Holset Cheetah Turbocharger
Proven Cheetah Technology:
- Drop-In Replacement
- Lower EGT's
- 2.5" "Work Stock" Legal
- Stock Like Spooling
- Fleece Performance Exclusive FMW Compressor Wheel Technology
- Max Rear Wheel HP Rating: 650HP
- 40-45 PSI Operating Range
Show more
High Mount Pusher Compound Turbo System
Note:
- Atmospheric Turbo is sold separately.
Features:
- Supports up to 750HP with stock Holset charger
- Over 1000HP with upgraded chargers
- Low profile 6061-T6 aluminum coolant overflow tank
- CNC machined and laser-cut flanges
- Fully TIG welded
- Full steel intermediate charge pipe
- HD 4-ply silicone couplers
- All hardware included
- Not compatible with the factory emission system
Show more
BD Iron Horn Turbo Kit
Features:
- Increase airflow for more power, response, and reliability
- Replaces your factory turbo with an S300 SX-E Borg Warner T4 flange turbo
- Kit includes a 5.9L 2-piece BD high flow pulse T4 manifold and gaskets
- It drops right in place for an easy, clean installation
- Comp Wheel: 61.44mm (2.42in) to 69.00mm (2.72in)
- Turbine Wheel: 76mm (2.99in) or 80mm (3.15in)
- A/R Ratio: 0.91, 1.00, or 1.10 depending on the application
- Flow: 77 Lb/min to 98 Lb/min
- Approximate rated 500hp - 700hp (depending on truck configuration)
Show more
Only required with pusher compound turbo system
No Thanks
Atmospheric Turbo
For up to 750HP, we recommend going with an S475 or Billet S476 Atmospheric Turbocharger if you are pairing it with a Stock Turbocharger.
Show more
BBI Stage 1 Fuel Injectors
Features:
- 30% increase when compared to stock
- Utilizes a 143° spray angle
- Flow rate of 78 l/h/100bar
- Capable of up to 700RWHP
- No core charge
- 2-year warranty
Show more
Injector Set - 120hp (45% Over)
- Supports up to 900RWHP
- 2-Year Unlimited Mile Warranty
- Brand New Injectors - No Core Charge
- 45% Over
Show more
S&S 0%-500% Over Performance Injector (6x)
Please select the 45% Option.
Features:
- Built to the highest quality standards using industry-leading components
- Tested on the world’s best equipment by highly skilled technicians.
- Requires a core deposit
Show more
Fleece PowerFlo 750 CP3
Features:
- Proven to support 750 RWHP
- Eliminates the factory fuel flow restriction that begins at 3,000 RPM
- Allows you to maintain desired fuel rail pressure through your entire RPM range
- Every CP3 has been tested in Fleece's engine simulator and pump test stand to simulate real-world situations
Show more
S&S High Pressure CP3 Pump
- OEM+ up to 14mm high-performance units
- Proven motorsports history
- Optimize your engines ability
Show more
Fass 165GPH Signature Series Titanium Lift Pump
Features:
- Power Rating: 600 - 900HP
- Preset Fuel Pressure: 16-18PSI
- Flow Rating: 165GPH
- Filter Life Expectancy: 30,000 Miles
- Filtration Rating: 3 Micron
- Warranty: Limited Lifetime Warranty
Show more
No Thanks
Smeding HD 104lb Valve Springs
Features:
- 104lb Valve Springs
- Includes (24) Valve Springs
- Must-have for performance enthusiasts running 50PSI or greater
Show more
Hamilton Cams 103lb Valve Springs
Features:
- Triple Shot Peened & Stress Relieved
- 103lb Springs
- Handles Over 50PSI of Boost
- 180lb Nose Pressure
- Sold as a Set
Show more
No Thanks
Smeding Performance Push Rods
*Recommend*
Features:
- Push Rod Specs: 3/8" x .120 wall intake pushrod and a 7/16" .120" exhaust pushrod.
- If you are over 750hp with your ISB, the cylinder pressures dictate that you step up to Smeding Diesel's extreme duty
Show more
Hamilton Cams Extreme Duty Pushrods
Features:
- Handles Over 750HP
- Stronger & More Reliable than OE
- Complete Set (varies on inventory levels at the time)
- 3/8" .095 Wall Intake Pushrod & 7/16" .120 Exhaust Pushrod
- Or
- 12mm diameter .120" wall throughout
Show more
No Thanks
ARP Head Stud Kit
ARP Pro Series cylinder head studs are cold-forged to ensure molecular integrity.
Features:
- The only fastener to trust in your build
- 12 Point Heads
- Black Oxide Finish
- 220,000 PSI Tensile Strength
Show more
Custom Aged ARP Head Stud Kit
The Custom Aged 247-4204 add another layer of security in your Cummins build with extra-strong studs with the Custom Aged 625+ material that has a minimum rating of 260,000psi tensile strength. This ensures that even with abnormally high combustion chamber pressure the 247-4204 Custom Aged Studs will provide the clamping strength necessary to keep your cylinder head from lifting.
Features:
- Minimum 260,000 PSI Tensile Strength
- The Only Fastener to trust to ensure a safe build
- Complete Kit
- Custom Aged 625+ Material
Show more