2022-2024 Cummins AMDP HP Tuners Custom Tune File

Description

Fits:

Year	Make	Model
2022-2024	Dodge/RAM	6.7L Cummins Pickup

Note:

This is for standard trucks with the 68RFE or Aisin transmission equipped. Not compatible with C&C or PTO-equipped trucks. Click Here for C&C Trucks.
These are the tune files only and you will require an HP Tuners MPVI device in order to flash the tuning onto your truck. If you require a device, be sure to select the addon.

After rigorous testing, AMDP is proud to offer their Custom tuning on the 2022-2024 6.7L Cummins which is applied via the HP Tuners MPVI tuning device. This AMDP Custom Tuning will unlock your 5th Gen's true potential.

These tune files will range from 0HP Modified up to 150HP Race tunes. Still wanting more power? We can have these custom-tune files written to accommodate any modifications your truck may have. Just let us know!

These tune files are compatible with the RTD4, MPVI2. MPVI3 & MPVI4 devices

IMPORTANT: This process requires swapping the ECM to a 2019-2021 year model ECM. Please select the ECM Add-on before checking out.

We do not support lope tunes or smoke tunes.

Power Level

Level 1: 45HP
Level 2: 75HP
Level 3: 90HP
Level 4: 120HP
Level 5: 150HP

Notes

This is for the standard trucks with the 68RFE or Aisin transmission equipped. Not compatible with C&C or PTO-equipped trucks. Click Here for C&C Trucks.
Some 2023 Models equipped with the 6-button cruise control will take longer to build the tuning files for.
SOTF is built for CCV-style switch. Be sure to select the Addon!
The latest HP Tuners BETA VCM suite MUST Be used. (Update before proceeding).
This requires swapping the ECM to a 2019-2021 year model ECM.
Your ECM Serial Number can be found on the middle line of the sticker on the back of the ECM.
A Bypass cable is required to flash the truck.

Installation

Click here to view MPVI Flashing instructions

The latest HP Tuners BETA VCM suite MUST Be used. (Update before proceeding).

With the original ECM installed pull a read with your MPVI device.
Email the read to tunes@dirtydieselcustoms.com with the order number and ECM S/N on the sticker of the new ECM.
You will receive an email back with your tune file in 1-2 business days.
Disconnect batteries and install new ECM.
Reinstall Batteries after ECM installed.
Place the key in the RUN position ( make sure the engine is not running)
Install the bypass cable and MPVI device into the OBD
Open the tune file we provided via email and WRITE ENTIRE to the truck.
Once the truck is tuned, HP will prompt you to turn the key off then on. Do NOT turn the engine over. Leave the key in the on position for 10 seconds and then start the truck.

Questions and Answers

Previously asked questions

We've compiled a list of questions and answers below.

Don't see your question? Ask us anything about this product.

Ask a Question

Can I use a used ecm as long as it is the correct part number?

As long as the part # is the same, you're in business!
Why does it say no ecm swap required but in the questions you said yes

The no ECM required is stipulating that you have sourced a 2019-2021 ECM somewhere else.
I currently have a delete on my 22 Cummins raceme ultra. Not happy with the tunes. Is it possible to use that ecm and monitor and get your tunes?

100% - but you must perform an ECM swap, or have a donor 2019-2021 ECM (part # 4384696) in order to properly and effectively get your 2022 tuned!
Do I need the ECM for a 2019 3500?

Yes, this requires swapping the ECM to a 2019-2021 year model ECM.
Hey I’m just wondering do I need to buy credits with this tuning package or does it come with the tunes already?

You have the option to buy credits when you purchase this, if you have 0 you'll need to add at least 6 credits.
I have a 2024 Ram 3500 High output 6.7 Cummins. I'd like to tune it, do I need the ECM OPTION? Will this also delete the DPF?

Yes, you will need to swap the ECM to a 2019-2021 model, and the DPF/CAT will need to be removed.
can the tune be installed via ez lynk tuner ?

No.