2022-2024 Cummins AMDP HP Tuners Custom Tune File

Note:

• This is for standard trucks with the 68RFE or High Output Aisin transmission equipped. Not compatible with C&C or PTO-equipped trucks. Click Here for C&C Trucks.
• These are the tune files only and you will require an HP Tuners MPVI device in order to flash the tuning onto your truck. If you require a device, be sure to select the addon.

After rigorous testing, AMDP is proud to offer their Custom tuning on the 2022-2024 6.7L Cummins which is applied via the HP Tuners MPVI tuning device. This AMDP Custom Tuning will unlock your 5th Gen's true potential.

These tune files will range from 0HP Modified up to 150HP Race tunes. Still wanting more power? We can have these custom-tune files written to accommodate any modifications your truck may have. Just let us know!

These tune files are compatible with the MPVI3 & MPVI4 devices.

Tuning is delivered through the HP Tuners TDN app. Your stock read goes to your tuner in the app and your tune file comes back the same way.

We do not support lope tunes or smoke tunes.

Level 1: 45HP
Level 2: 75HP
Level 3: 90HP
Level 4: 120HP
Level 5: 150HP

• This is for the standard trucks with the 68RFE or High Output Aisin transmission equipped. Not compatible with C&C or PTO-equipped trucks. Click Here for C&C Trucks.
• Some 2023 Models equipped with the 6-button cruise control will take longer to build the tuning files for.
• SOTF (Switch On The Fly) is available through the cruise control buttons.
• 6 HP Tuners credits are required.
• No ECM send-in unlock service is required. This tuning unlocks and flashes the ECM through the OBD port.
• The latest HP Tuners BETA VCM suite MUST Be used. (Update before proceeding).
• Your ECM Serial Number can be found on the middle line of the sticker on the back of the ECM.
• A Bypass cable is required to flash the truck.

Click here to view MPVI Flashing instructions

The latest HP Tuners BETA VCM suite MUST Be used. (Update before proceeding).

1. Pull a read with your MPVI device.
2. Email the read to tunes@dirtydieselcustoms.com with the order number and ECM S/N on the sticker of the ECM.
3. You will receive an email back with your tune file in 1-2 business days.
4. Place the key in the RUN position ( make sure the engine is not running)
5. Install the bypass cable and MPVI device into the OBD
6. Open the tune file we provided via email and WRITE ENTIRE to the truck.
7. Once the truck is tuned, HP will prompt you to turn the key off then on. Do NOT turn the engine over. Leave the key in the on position for 10 seconds and then start the truck.

Don't see your question? Ask us anything about this product.