1999-2004 Powerstroke 4WD 2" Leveling Spring Kit (BDS313H)
Clean up the look of your 7.3 with this BDS Suspension 2" Leveling Kit. With two front Glide-Ride Leaf Springs, bolt-style leaf alignment clamps, anti-friction pads, and tapered leafs for a smooth ride through wheel travel. BDS kits are some of the most complete kits out there, meaning; it has everything you need for installation.
Tire & Wheel Combinations:
33" x 12.50" w/ 16 x 8 and 4" (Trimming may be required)
Notes:
- Will NOT fit vehicles manufactured before 3/1/99
- Although this is pictured with Fox Shocks, this kit will come equipped with BDS Shocks. If you would like fox shocks, please reach out.
- These trucks were manufactured with two different style front u-bolts. You will need to know if your front leaf spring u-bolts are square or are halfway between round and square with a gentle radius around the OE cast u-bolt plate before ordering.
- The stock Super Duty came with a rear 2", 3", or 4" rear block. You may need to change the block and/or u-bolts in order to level the truck.
- #003202, #003402, #003602, #003609, #003802, and #003809 come with OE rubber bushings installed
- Confirm build date, front u-bolt type, and rear leaf pack overload position before ordering
Installation:
- Click Here For Installation Instructions
- Difficulty: 3 (where 1 = easiest and 5 = complicated)
Part Number: BDS313H
Note:
- Please double check what U-Bolts your trucks needs before ordering
- Models with square front U-bolts will come with Replacement front Sway Bar Links.
Front Single NX2 Series Shocks
Show more
Front Single Fox 2.0 Series Shocks
Improve ride quality and capability with the FOX 2.0 performance series IFP shocks. Specially designed for BDS lift systems, these FOX 2.0 aluminum body shocks offer improved cooling capacity and corrosion protection. These shocks use race-proven vehicle specific valving along with an internal floating piston (IFP) monotube design to separate shock oil from high pressure nitrogen to eliminate aeration and maximize performance on/off-road.
Show more
Front Dual NX2 Series Shocks
Show more
Front Dual Fox 2.0 Series Shocks
Show more
No Thanks
Rear NX2 Series Shocks
The BDS NX2 series gas shocks offer impressive performance on and off-road. Standard in most BDS lift kits, these nitrogen charged, twin-tube shocks offer 10-stage velocity sensitive valving for lightning fast damper performance and control.
Show more
Rear Fox 2.0 Series Shocks
Improve ride quality and capability with the FOX 2.0 performance series IFP shocks. Specially designed for BDS lift systems, these FOX 2.0 aluminum body shocks offer improved cooling capacity and corrosion protection. These shocks use race-proven vehicle specific valving along with an internal floating piston (IFP) monotube design to separate shock oil from high pressure nitrogen to eliminate aeration and maximize performance on/off-road.
Show more
Note:
- If you would like a Single Steering Stabilizer, select 1.
- If you would like a Dual Steering Stabilizer, select 2
- For trucks that do not have a factory tie rod stabilizer mount please select the Single Steering Stabilizer Bracket Kit available separately.
No Thanks
Single NX2 Steering Stabilizer
Choose this option to replace the factory steering stabilizer and upgrade to a NX² series single steering stabilizer.
Show more
Single Fox 2.0 Series Steering Stabilizer
Show more
Note:
If you selected Steering Stabilizer Options, you have to select the corresponding kit.
No Thanks
BDS Suspension's revolutionary spring-loaded, full-floating RECOIL traction bar system is engineered to improve traction and limit axle wrap without limiting suspension travel or decreasing ride quality. BDS RECOIL traction bars offer you the freedom to tune the spring tension for optimal performance on-road, off-road, towing, or competition pulling. These traction bars can be used on stock height or lifted trucks and work with both lift blocks and replacement leaf spring kits.
No Thanks
Required if you added a Traction Bar
No Thanks
Recoil Traction Bar Mounting Kit
Show more