1994-1999 Cummins 4.5" Lift Kit (BDS211H)
Keep it riding tall and true with this BDS Suspension 4.5" Lift Kit. This lift kit comes with new front Pro-Ride Coil Springs, upper and lower greaseable control arms, track bar relocation bracket, pitman arm, extended length urethane bump stops, anti-sway bar drop brackets, brake line relocation brackets, and steering stabilizer. BDS kits are some of the most thorough in the business which means that you can drive in with a stock truck, open up your lift kit and drive out modified without having to go look for small spare parts that weren't included as you might find in a less complete kit!
Tire & Wheel Combinations:
- 35" x 12.50" w/ 16 x 8 and 4"
- This is designed for vehicles without the Top Mounted Overload Springs
- For models built after February 9, 1994, due to track bar stud size.
- May require exhaust modification
- These vehicles were produced with and without a top-mounted overload spring. You will need to identify which your vehicle has before ordering.
- Pictured with an additional rear spring option. Rear spring option NOT included
- Click Here For Installation Instructions
- Difficulty: 3 (where 1 = easiest and 5 = complicated)
Part Number: BDS211H
6" Front Coil Springs
5" Front Box Kit
This Box Kit includes the following products:
- Pitman Arm
- 2 Bump Stop Extensions
- Bolt Pack - Sway Bar Drop
- Bolt Pack - Relocation Brackets
- Bolt Pack - Track Bar Bracket
- Bolt Pack - Brake Line Relocation
- Brake Line Relocation Bracket (flat)
- 2 Brake Line Relocation Brackets w/tab
- Brake Line Relocation - U Drop
- Track Bar Washer
- 6 90 Degree Grease Zerks
- 2 Strait Grease Zerks
- 8 Control Arm Bushings
- Upper & Lower Control Arms
- 2 3/4 x 0.120 x 2.375" Sleeves
- 4 3/4 x 0.095 x 2.510 Sleeves
- 4 3/4 x 0.134 x 2,25 /Sleeves
- Track Bar Bracket
- Driver & Passenger Side Link Relocation Brackets
- Driver & Passenger Side Sway Bar Drop
The system is available with either the standard block & add-a-leaf kit or replacement BDS Glide-Ride Springs. If choosing the rear block & add-a-leaf option, be sure to check if your vehicle is equipped with a top-mounted overload spring or not. The top-mounted overload spring requires a different rear block & add-a-leaf kit. Please make the appropriate selection.
4.5" Rear Block & Add-A-Leaf Kit w/o Overload
4.5" Rear Block & Add-A-Leaf Kit w/ Overload
4.5" Lift Leaf Spring (2x)
Required if you have selected full Leaf Spring replacements.
Rear Block Kit
NX2 Series Shocks (2x)
The BDS NX2 series gas shocks offer impressive performance on and off-road. Standard in most BDS lift kits, these nitrogen-charged, twin-tube shocks offer 10-stage velocity-sensitive valving for lightning-fast damper performance and control.