2022-2024 Cummins AMDP HP Tuners C&C Custom Tune Package

Fits

Note: This package is for Cab & Chassis trucks only. Click Here for standard trucks.

After rigorous testing, AMDP is proud to offer their Custom tuning on the 2022-2024 6.7L Cummins Cab and Chassis, applied via the HP Tuners MPVI tuning device. This AMDP Custom Tuning will unlock your 5th Gen's true potential, sharpening performance and maximizing efficiency. These tune files range from 0HP Modified up to three power levels. Still wanting more power? We can have these custom-tune files written to accommodate any modifications your truck may have. Just let us know!

Each package includes the necessary equipment to load your custom AMDP tune file. This tune file is compatible with RTD4, MPVI2, MPVI3, and MPVI4 devices, providing a seamless software solution for your 6.7L Cummins.

IMPORTANT: This process requires swapping the ECM to a 2019-2021 year model ECM.

We do not support lope tunes or smoke tunes.

Package Includes:

• HPTuners MPVI4 Blank Device (M04-000-00)
• 2018-2024 Cummins Bypass Cable (BOD18-22BypassCummins)
• 2022-2024 AMDP 6.7L Cummins C&C Custom Tuning

Level 1
Level 2
Level 3

• This tuning is specifically for C&C trucks only. Click Here for standard trucks.
  
• No switch on the fly
• Only single power levels are available at this time
• The latest HP Tuners BETA VCM suite MUST be used. (Update before proceeding).
• This requires swapping the ECM to a 2019-2021 year model ECM.
• Your ECM Serial Number can be found on the middle line of the sticker on the back of the ECM.
• The included Bypass cable is required to flash the truck.

Click here to view MPVI Flashing instructions

The latest HP Tuners BETA VCM suite MUST be used. (Update before proceeding).

1. With the original ECM installed, pull a read with your MPVI device.
2. Email the read to tunes@dirtydieselcustoms.com with the order number and ECM S/N on the sticker of the new ECM.
3. You will receive an email back with your tune file in 1-3 business days.
4. Disconnect batteries and install new ECM.
5. Reinstall Batteries after the ECM is installed.
6. Place the key in the RUN position ( make sure the engine is not running)
7. Install the bypass cable and MPVI device into the OBD
8. Open the tune file we provided via email and WRITE ENTIRE to the truck.
9. Once the truck is tuned, HP will prompt you to turn the key off, then on. Do NOT turn the engine over. Leave the key in the on position for 10 seconds and then start the truck.

If you already have the MPVI3 or MPVI4 Device and are just looking for the tune files, click here