2004+ Cummins HD AMDP EFILive Autocal Tune Package

Fits: Cummins HD Applications. See additional fitment information below.

Note: If you already have an AutoCal device and only need tune files, Click Here

Unlock the efficiency and power of your Cummins-powered commercial truck or heavy equipment. This comprehensive bundle pairs the EFILive AutoCal V3 with industry-leading AMDP HD Custom Tuning. Designed for everything from the ISB 5.9L to the X15, these calibrations optimize throttle response, fuel economy, and overall power delivery for demanding work environments.

IMPORTANT: This bundle includes a Blank AutoCal V3. Tuning requires a vehicle-specific adapter for the 9-pin diagnostic port (sold separately).

• 2017+ Applications: Use the 2017+ Cummins Green Male to OBD-II Female Adapter (SAE-J1939-G).
• Pre-2016 Applications: Use the Pre-2016 Cummins Black Male to OBD-II Female Adapter (SAE-J1962).

AMDP does not support lope or smoke tunes.

• Custom tuning for Cummins HD applications from 2004 and up!
• Supports a wide range of ECMs including CM850, CM2250, CM2450, and more
  
• Improves throttle response, fuel economy, and power delivery
  
• Step-by-step setup ensures a smooth install and flash process
  
• Compatible with F650/F750 and other Cummins-powered HD vehicles

Package Includes:

• EFILive Blank AC3 AutoCal (ACV3)
• 2004+ Cummins HD AMDP EFILive Tune File (Single Power Level)

• Single-power-level tunes are currently available.
• A 9-pin-to-OBD adapter is required for most heavy-duty diagnostic ports.
• Requires unlinking from other tuners if AutoCal was previously paired.
• Not compatible with EFILive FlashScan unless Cummins HD support is purchased separately.
• Autocals must be linked to the AMDP HD Master Device.
• F650/750 with the Cummins engine is also supported!

Step 1: Purchase Tuning
Step 2: With your EFILive device and 9-pin adapter, pull a read from the ECM
Step 3: Send the read to tunes@dirtydieselcustoms.com with your order number as the subject line. If your Autocal device is not currently linked to the AMDP Master, you will need to request link codes now. If you have this device linked with another tuner, you will need to be unlinked from it first.
Step 4: Within 48 hours, you will receive your tune file back in .bbx format. If you are wanting to flash the file as a pass-through:
How to convert your .BBX file to a .CTZ file for Passthrough Flashing
Double-click and open your .BBX file from the email, or from wherever you may have saved it on your computer. (This will open the Quick Setup Manager).
Once the Quick Setup Manager is open, right-click on the tune file and then select "Export Tune File".
This will export the tune file to where you save it and convert it to a .CTZ file.
Step 5: Flash the vehicle, and you are done!

If you already have an AutoCal V3 and are just looking for the tune files, Click Here!