The Banks Ram-Air Differential Cover replaces the stock rear cover on 2001-2019 Duramax and 2003-2018 Cummins trucks with the AAM 11.5" or 11.8" 14-bolt rear axle. Scoops on the back of the cover push air through the external cooling fins while you drive, and the inside is shaped to keep gear oil moving to the ring, pinion and axle bearings instead of churning against a flat back. Cooler oil lasts longer and protects the gears.
Available in Raw (19259), Satin Black (19249) and Black-Ops (19269).
Features
Patented Ram-Air scoops direct air through the cooling fins, with a breakaway point so a snagged scoop doesn't damage the cover
24 external radiator fins with 534 sq. in. of surface area
Die-cast A380 aluminum housing
12-point chrome-plated flanged mounting bolts
Magnetic 3/4" fill plug and recessed magnetic 3/8" drain plug, both 3/8" square drive, no hex wrench needed
1/2" stainless steel sight-glass with contrast screen and Viton O-ring seal
Notes
Fits the AAM 11.5" or 11.8" 14-bolt rear axle only. Does not fit 10.5" 14-bolt axles.
2003-2005 Ram 5.9L: check before ordering. If the bottom two cover bolts are horizontally aligned, the truck has the non-HO 10.5" ring gear axle and this cover will not fit.
Will this work with 2014 2500 with rear coil springs?
Yes, provided the truck has the standard AAM 11.5 or 11.8" x 14-bolt rear axle.
?
Would this differential cover fit a 2013 GMC Sierra 2500 HD with a Saginaw rear end with 10 1/2" gear with 14 bolts?
It will not fit.
?
Will this fit a 2011 ram 2500?
This fits the 2001-2018 Didge Cummins 2500/3500 w/ AAM 11.5 or 11.8" 14 bolt rear axle.
?
Anyone put one on their LBZ? Just curious if it fits for sure, website fitment chart isn't very specific?
You can breathe easy—this is a direct bolt-on for your 2006-2007 LBZ Duramax.
?
Will this fit 2017 gmc 3500 diesel
You bet!
Vehicle Fitment
- Part No: 19259
Sway bar spacers (19249-2) required on Ram trucks with a rear sway bar or airbag suspension.
2003-2005 Ram 5.9L: will not fit the non-HO 14-bolt 10.5" ring gear axle. If the bottom two cover bolts are horizontally aligned, this cover will not fit.
Loading Fitments...
Customer Reviews
Overall rating: 5.0 / 5 from 41 reviews.
Good product, everything fit well , installation was easy
Fit and finish is perfect. Cheaper then an OEM when the plug seizes up in the factory one. Easier to change oil and the sight glass is very handy. Have had on the truck for 15000kms now on and off road and is holding up great.
No more pulling differential cover to change the oil! All plugs are magnetic and an awesome sight glass to see oil level! Looks good too! Banks really did an awesome job with this differential cover!
Huuuge improvement! Great quality. Sight glass, drain plug makes a world of difference. Looks rad.
2 things I noted were:
-You will have slightly less clearance as the cover hangs further down to get more airflow in the luvers
-Gasket fit takes a little playing around with. Don't stretch it.
Would 100% purchase again. 👌
Perfect fit . A great and smart addition to my truck . Now I’m waiting for Banks to build one for the front differential. Hopefully they will come up with it soon After watching his video , there’s no way I’m buying anything else . Shot out to Dirty Diesel with the fast and efficient service and shipping…. Thanks
Best built diff cover I’ve ever installed. Well engineering and great fit. Oring instead of gasket a plus. Luv the site glass. Looks fantastic! Hats off to Banks, they always produce great, functional products. Thanks Dirty Diesel Customs!
After watching banks 3 part comparison video on YouTube, I was sold on this diff cover. Beautiful cover. Only complaint I have is the installation instructions. In the box they give you a YouTube link to watch the installation video and there is also a paper copy of installation instructions. Both instructions tell you two different things. Different torque specs and the vid doesn’t mention putting Teflon tape on the drain and fill plugs. Ended up just going with the higher torque spec and putting the Teflon tape on. Other issue I ran into was my 10mm 12 point socket did not fit between the fins for 3 of the bolts. I ended up having to grind down my socket to fit in between. But at the end of the day I got the cover on and looks awesome!
Love the Banks diff cover! Well thought out design, looks great and I could swear my truck is just a little more responsive. I think my old aftermarket diff cover with extra capacity and a flat back may have been counterproductive
Painted the differential cover red and have added the Hornblasters system. In process of. Customizing the truck will send pictures of the finished project
Build quality is great. Good install instructions. Mounting hardware is good. It’s all in all a great addition. Makes oil changes easy and less messy. I will be adding a diff temp sensor soon. But from what I can tell is it works as advertised