2019-2020 Ram 2500 3" Radius Arm Lift Kit (BDS1653H)

This Box Kit includes the following products:

• Driver & Passenger Side Brakeline Brackets
• Bump Stops
• Adjustable Track Bar
• 5/16" x 1-1/4" SHCS
• 4 Trackbar Bushings
• Trackbar Sleeve
• Loc-tite
• Sway Bar Link Assembly
• Clevis
• Upper & Lower Sleeve
• Offset Spacer
• Bolt Pack
• Bolt Pack - Brake Line Bracket

View product page

This Box Kit includes the following products:

• Rear Track Bar Bracket
• Track Bar Bracket Sleeve (2-1/8" long)
• Bolt Pack - Rear Track Bar Bracket
• Bolt Pack
• Rear Bump Stop
• Bolt Pack - Rear Bump Stop
• 12" Sway Bar Link
• Spherical bushings
• 3/4” x 1/2” ID x 1.255 DOM sleeve
• Grease Zerk w/ Check Ball
• Bolt Pack - Rear Sway Bar

The BDS NX2 series gas shocks offer impressive performance on and off-road. Standard in most BDS lift kits, these nitrogen-charged, twin-tube shocks offer 10-stage velocity-sensitive valving for lightning-fast damper performance and control.

Fox 2.0 performance series shocks have been tuned and tested by both Fox and BDS Suspension to maximize performance specific to each application and to every BDS Suspension system. The basic shock design is based on proven Fox Racing Shox race products, but re-designed to maximize the ride quality, handling, and control of your BDS-equipped truck or jeep, whether on or off the road.

The BDS NX2 series gas shocks offer impressive performance on and off-road. Standard in most BDS lift kits, these nitrogen-charged, twin-tube shocks offer 10-stage velocity-sensitive valving for lightning-fast damper performance and control.

Fox 2.0 performance series shocks have been tuned and tested by both Fox and BDS Suspension to maximize performance specific to each application and to every BDS Suspension system. The basic shock design is based on proven Fox Racing Shox race products, but re-designed to maximize the ride quality, handling, and control of your BDS-equipped truck or jeep, whether on or off the road.

FOX 2.0 Performance Series Steering Stabilizer. This new stabilizer is designed for just that - specifically to be a stabilizer. These are made from the same base components as the 2.0 performance series shocks and properly valved and pressurized to be the ultimate stabilizer. The 50/50 valving and lower 50 psi nitrogen charge (compared to 200 psi in the 2.0 shocks) provide neutral dampening so they will not create a "pull" when installed in a single stabilizer setup. Fitted with the BDS/Fox logo sticker they are a perfect match to the BDS/Fox 2.0 shocks and a huge performance upgrade from a standard steering stabilizer.