2011-2016 Powerstroke 2.5" Radius Arm Coilover Lift Kit (BDS1509F)
If you want to lift your truck and increase the strength then the Radius Arm Coilover Lift kit by BDS Suspension is the way to go! These systems convert the standard front coil springs over to FOX 2.5 remote reservoir Coilovers for vastly improved dampening capability and performance across any terrain.
Tire & Wheel Combinations:
- 35" x 12.50 w/ 17 x 9 and 5"
- 35" x 12.50 w/ 18 x 9 and 5"
- 35" x 12.50 w/ 20 x 9 and 5"
Notes:
- Ford F250 Diesel models w/o top mounted overload rear springs
- Models equipped with a 3-3/4" rear block from the factory do not require a rear block kit in order to achieve a more level stance.
- For a more tail-high stance, substitute #013519 5" rear block kit
Installation:
- Click Here For Installation Instructions
- Difficulty: 4 (where 1 = easiest and 5 = complicated)
Part Number: BDS1509F

Fox 2.5 Series Remote Reservoir Coilovers
When you want the best in performance and capability, go with FOX. These race-proven FOX 2.5 factory series remote reservoir coilovers up the ante allowing for next-level damper capability and control all neatly packaged. Designed for bolt-on installation, the engineers at BDS and FOX teamed up to offer this race-winning technology into a bolt-on, pre-tuned Coilover designed to perform and provide correct ride height right out of the box. From valving to spring rate, preload, and hose length; designed to take all the guesswork out of setting your vehicle up and are designed to be used with BDS lift systems. These coilovers use a large 2.5" body, 3" coil springs, 7/8" hardened carbon steel shaft, high flow piston, JM92 advanced racing shock oil, CNC machined 6061 T6 ends, and external remote reservoir to improve damper capability across any terrain.
Show more

Coilover Mounting Kit
This Box Kit includes the following products:
- 2 Lower Coilover Mounts
- 2 Upper Coilover Mounting Brackets
- 6 Zip Ties
- 2 Bolt Packs
Show more

Radius Arm Box Kit
This Box Kit includes the following products:
- 2 Radius Arm Assemblies
- Superduty Radius Arm 2"-4"
- Bushing
- 2 BDS Badges
- Rivet Bolt Pack
- Bag Kits
- 4 Cam plates
- 2 M18-2.5 Lock Nuts
- 2 M18-2.5 x 150 Bolts
- 4 3/4" SAE flat washers
- 6 Zip Ties
- 2 Push Pin Zip Ties
Show more
2.5" Front Box Kit
This Box Kit includes the following products:
- Adjustable Track Bar Assembly
- Adjustable Track Bar Frame End
- Adjustable Track Bar Axle End
- Track Bar Collar
- 4 5/16-18 x 1-1/4 SHCS Clear Zinc
- 1.125 x .156 x 1.745 Sleeve
- 2 Bushings
- Grease Fitting
- Thread Locker
- Brake Line Brackets
Show more
Choose from a 4", 5", or no rear block kit to achieve your preferred stance. Notice: Some F250/350s come equipped from the factory with a 3-3/4" rear block and do not require a rear block kit to achieve a more level stance. If a more tail high stance is preferred choose the 5" rear block option.
No Thanks
4" Rear Block Kit
This Box Kit includes the following products:
- 2 4" Superduty Rear Blocks
- 4 5/8" x 3-1/8" x 14" Semi-Round U-bolts
- 8 5/8 Fine High Nut Black E-coat
- 8 5/8 SAE Flat Washers -Black
Show more
5" Rear Block Kit
This Box Kit includes the following products:
- 2 5" Rear Super Duty Blocks
- 2 Super Duty Rear Spring Plates
- 4 3/4" x 3-5/8" x 15" Round U-bolts
- 8 3/4" Serrated Edge Flanged Nuts
Show more
Important: With the Coilovers & the Mounting kit provided, you have the option of keeping the factory location shocks or upgrading to Fox 2.0.
No Thanks

Fox 2.0 Series Shocks (2x)
Improve ride quality and capability with the FOX 2.0 performance series IFP shocks. Specially designed for BDS lift systems, these FOX 2.0 aluminum body shocks offer improved cooling capacity and corrosion protection. These shocks use race-proven vehicle-specific valving along with an internal floating piston (IFP) monotube design to separate the shock oil from high-pressure nitrogen to eliminate aeration and maximize performance on/off-road.
Show more