2008-2010 Powerstroke 4" BDS Lift Kit (BDS546H)
The 6.4L Powerstroke in your Super Duty is a powerhouse that deserves the stance that can backup that engine! In comes the BDS Suspension 4" Suspension Lift Kit! This kit is centered around two Pro-Ride Coil Springs; everything included in this kit is to help steering angle correction, center your axle and retain stock driving characteristics.
Tire & Wheel Combinations:
- 35" x 12.50" w/ 17 x 9 and 4.5"
- 35" x 12.50" w/ 18 x 9 and 4.5"
- 35" x 12.50" w/ 20 x 9 and 4.5"
- If equipped with a 2-piece driveshaft, a driveshaft alignment kit may be required
- Click Here For Installation Instructions
- Difficulty: 3 (where 1 = easiest and 5 = complicated)
Part Number: BDS546H
4" Front Coil Springs
Fox 2.5 Series Remote Reservoir Coilovers
The new coil-over conversion setup for the 2.5" & 4" lift heights utilizes the factory coil bucket and an included integrated upper and lower coil-over mount bracket system. The installation of the upper bracket requires minor modification to the factory coil mount. This system is now available as a stand-alone kit for those looking to upgrade an existing coil spring or spacer kit.
Fox 2.5 Series Remote Reservoir Coilovers w/ DSC
Coilover Mounting Kit
4" Front Box Kit
This Box Kit includes the following products:
- 2 Radius Arm Drop Brackets
- 3 Bolt Packs
- Driver & Passenger Side Sway Bar Drop Brackets
- Track Bar Bracket
- 2 Cam Washers
- 2 Bump Stop Spacers
- 2 Brake Hard Line Extensions
- 2 Front Brake Line Brackets
- 2 ABS Line Brackets
- Pitman Arm
- Stabilizer Bracket
- 2 Zip Ties
5" Rear Block w/o Overloads
5" Rear Block Kit w/ Overload