2003-2010 Cummins BDS Leveling Kit (BDS223H)
Level out the looks of your 3rd gen Cummins using the BDS Suspension 2" Coil Spacer Lift Kit. This 2" leveling kit comes with two cast aluminum upper coil buckets. These buckets bolt solid to your upper coil pocket giving you 2" of lift while maintaining your factory ride quality. Perfectly suited to level the stance of your Dodge truck. Front and rear NX² series shock absorbers are included meaning you've got everything you need to get your truck back on the road!
Tire & Wheel Combinations:
- 33" x 12.50" w/ 17 x 9 and 5"
Installation:
- Click Here For Installation Instructions
- Difficulty: 3 (where 1 = easiest and 5 = complicated)
Part Number: BDS223H
2" Coil Spacer Kit
Show more
NX2 Series Shocks (2x)
Show more
Fox 2.0 Series Shocks (2x)
Show more
No Thanks
No Thanks
Dual Steering Stabilizer Bracket Kit
Show more
No Thanks
Universal Recoil Traction Bar
Show more
Standard Series Traction Bar - (3.5" Axle Tube)
Reduce rear pinion angle change commonly referred to as axle wrap during acceleration with these BDS heavy-duty traction bars. Tubular design for good looks as well as serious axle control.
Show more
Standard Series Traction Bar - (4" Axle Tube) (2x)
Show more
The frame brackets install by drilling mounting holes for the brackets while the axle brackets install using a set of u-bolts. The traction bars and mounting brackets use a durable gloss black powder coat finish.
Note:
- Bracket kits are vehicle specific
- Fits 4" Rear Axle models only
- Required if you have selected the Recoil Traction Bar
No Thanks
Recoil Traction Bar Mounting Kit
Show more
A BDS adjustable track bar is a must for any Dodge 2500 4x4. Our adjustable track bar will ensure proper suspension geometry by centering the axle side to side. This will give your Dodge a more stable feel and will help reduce excessive wear on your suspension components.
No Thanks
Adjustable Front Track Bar
Show more
Features:
- Kevlar lined Stainless Steel Braided Brake Lines
- Virtually no volumetric expansion Firmer brake pedal feel with less pedal effort.
- Hose assemblies comply with D.O.T. Federal regulations (MVSS-106) Legal for street use in all 50 States.
- Teflon inner core (chemically inert) Approved for use with all brake fluids, including D.O.T. 5 Silicone.
- Resists moisture, Very flexible.
- Five-layer construction Rugged construction that resists road shock and hazards.
- Higher fitting pull-off than other D.O.T. assemblies.
- Standard SAE female fittings and ends Utilize standard brake fittings and hardware.
- PN# 102009 - Will NOT work on 2012+ trucks.
No Thanks
31" Front Brake Line
Show more
Features:
- Kevlar lined Stainless Steel Braided Brake Lines
- Virtually no volumetric expansion Firmer brake pedal feel with less pedal effort.
- Hose assemblies comply with D.O.T. Federal regulations (MVSS-106) Legal for street use in all 50 States.
- Teflon inner core (chemically inert) Approved for use with all brake fluids, including D.O.T. 5 Silicone.
- Resists moisture, Very flexible.
- Five-layer construction Rugged construction that resists road shock and hazards.
- Higher fitting pull-off than other D.O.T. assemblies.
- Standard SAE female fittings and ends Utilize standard brake fittings and hardware.
- PN# 102009 - Will NOT work on 2012+ trucks.
No Thanks
27" Rear Brake Line
Show more
No Thanks
Carrier Bearing Drop Kit
Show more
This kit converts the stem mount to a double shear, large hourglass eye mount; this drastically increases the amount of travel the sway bar system can handle as well as vastly improves the strength of the mounts and link. This is a great option for those looking for a strength upgrade but aren't ready to jump up to the high-end disconnect links.
No Thanks
Front Sway Bar Link Kit
Show more