2018-2020 F-150 XB Evo Supercharged Drivers

Out of the box, the Morimoto XB Evo and XB Evo Hybrid headlights only drive their LEDs at around half of their full potential to stay within DOT compliance limits. These bolt-on Supercharged LED drivers unlock the rest, boosting both low and high beam intensity by 30-50% over stock.

Installation takes minutes: swap the drivers onto the back of your headlight housings with the included hardware. Color-coded status indicators confirm ignition, low beam, and high beam power at a glance.

Note: Installation results in non-compliant peak intensity. Not for on-road use in the USA. Off-road use only.

These drivers pair with the XB Evo LED Headlights (LF2-501) and the XB Evo Hybrid LED Headlights (LF2-501Y).

Part Number: LF2-DRVSC13

• More Output: Boosts low and high beam intensity on XB Evo and XB Evo Hybrid headlights by 30 to 50 percent.
• Bolt-On: Direct replacement for the standard LED drivers, swapped on the back of the housings during install.
• Status Indicators: Red, green, and blue LEDs confirm ignition, low beam, and high beam power.
• Off-Road Only: Peak intensity is no longer compliant once installed, so these are not for on-road use in the USA.

• Output Boost: 30-50 Percent Increase
• Status Indicators: Red - Ignition / Green - Low Beam / Blue - High Beam
• Input: XB Evo / XB Evo Hybrid Multi-Pin Connector
• Compatibility: Morimoto LF2-501 and LF2-501Y Only
• Compliance: Off-Road Use Only (Non-Compliant Intensity)

• LED Drivers: 2x (One Pair) Supercharged LED Drivers
• Accessories: 6x Screws, 1x Packet Grease
• Warranty: Five (5) Years

Don't see your question? Ask us anything about this product.