Injector Build Specs: R3/88% Over/180HP/45LPM
The Industrial Injection 0986435503SE-R3 is a Stage 3 180HP / 88% Over Injector that has been extrude honed and balanced to create a perfect matching set of injectors that flow at 45LPM. The Stage 3 180HP / 88% Over injectors should be run with one of Industrial Injections Silver Phatshaft turbos or their compound turbo setups to run more efficiently and help reduce EGTs. Also recommended is a CP3 upgrade like their 85% over Dragon Fire Pump.
Part Number: 0986435503SE-R3
- Extrude Honed And Balanced
- 180HP Gain
- Flow Of 45LPM
- 88% Over Stock
- Built With Brand New Factory OEM Parts
- Balanced To A Tighter Tolerance
- Tested On A State of Art Factory OEM Test Stand
- 1-year Unlimited Mileage Warranty
- A new copper crush washer and o-rings for your installation.
- These tests include a resistance test, a system leak, purge, idle speed, mid-load, a full load, and a static back leak test. Also checked, is the solenoid response time, back leak flow, and fuel delivery.
- When replacing the injectors in your 5.9L Common Rail, Industrial Injection highly recommends replacing the injector connecting tubes to avoid new injector contamination.
- The most common failure of new injector installations is contamination and the problem that they see most on these comes from the injector connecting tubes.
- Each injector has a $150 core charge and is fully refundable if it is shipped back within 45 days.
- All Industrial Injection products are covered by a one year/unlimited mile warranty.
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.