2003-2007 Cummins 3.5" Mega Intake System (PDC0307MKT)

Fits

Most Pusher Products will be a special order and can take up to 1-2 weeks for delivery. If you need it sooner, contact us for our stock levels!

The Pusher PDC9498MKT 3.5" Mega Intake System replaces all of your 3" factory post intercooler plumbing and intake manifold with 3.5" mandrel-bent tubing that yields a 55% increase in flow over the stock components. The manifold is fitted with a half-inch thick CNC laser cut flange and a total of four 1/8" NPT ports to handle any combination of sensors and injectors. This system as well as any other Pusher intake can be run with or without the heater grid. So why the extra .5 inch? The circumference of the 3.5" tubing is nearly the exact same size as the perimeter of the square-shaped inlet on the factory 5.9L Cummins Plenum Plate! 

This system is constructed from 3.5" mandrel-bent tubing, a 1/2" thick flange and a 1/4" thick dipstick mounting bracket. In order to produce optimal penetration without impacting airflow, Pusher fully TIG welded this system with precise settings. As a result, you will notice a 50°-200°F drop in EGT's, as well as an increase of .5-1 MPG, Increased throttle response, and faster turbo spool!

Part Number: PDC0307MKT

• 55% increase of flow when compared to the stock components
  
• CNC Laser Cut 1/2" Flange
• Four 1/8" NPT Ports to handle any combination of sensors & injectors
• Works with Or without the heater grid
• Fully TIG welded
• Lowers EGT's 
• Increases fuel economy
• Increases throttle response
• Faster Turbo Spool

Includes:

• Mega Intake Manifold  
• Heavy-duty 4-ply silicone couplers
• Stainless T-bolt clamps
• OEM gasket
• OEM bolts
• Matching Amount of Port plugs.

• For an additional charge, select powder coating colours are available on this manifold.