2015 VW/Audi 2.0L TDI FlashZilla Stage 3 Tune File
Purchase to earn 934 Dirty Dollars Learn More
Description
Description
TuneZilla engine (ECU) tuning for the VW/Audi 2.0L TDI EA288, flashed at home through the OBD port with the TuneZilla FlashZilla Pro. Pick your power level above. Add the FlashZilla Pro below if you do not already own one.
Part Number: CR-TDI-150-003
Emissions-Off: included free with this tune. Select it in the TuneZilla Portal when you flash.
Tune Options
Tune Options
Stock baseline: 132 hp / 233 lb-ft at the wheel, Not published crank (est.)
| Tune | Part # | Wheel HP / TQ | Crank HP / TQ (est.) | Gain (crank) | Requires |
|---|---|---|---|---|---|
| Stage 1 | CR-TDI-150-001 | 156 hp / 288 lb-ft | Not published | +24 hp / +55 lb-ft (wheel) | None listed |
| Stage 2 | CR-TDI-150-002 | 167 hp / 298 lb-ft | Not published | +35 hp / +65 lb-ft (wheel) | None listed |
| Stage 3 | CR-TDI-150-003 | 190 hp / 325 lb-ft | Not published | +58 hp / +92 lb-ft (wheel) | None listed |
Crank figures are TuneZilla's published estimates.
Transmission Tuning
Transmission Tuning
Free Add-Ons
Free Add-Ons
Included at no charge with this tune. Select the ones you want in the TuneZilla Portal App when you flash. Where two options cover the same part (such as the 2200 and 2700 rail pressure sensors), pick only the one you installed.
- Emissions-Off (DPF, AdBlue, EGR, ASV & Swirl Flap) (CR-TDI-2L-MISC)
- Deep Idle (TDI-Deep-Idle)
For off-road and competition use only. Not legal for use on public roads or highways. Check your province or state regulations before installing.
Already own a TuneZilla tune and want to add something later? Use the FlashZilla Tune Revision page.
Requirements
Requirements
Genuine OEM CR190 turbo (not rebuilt or aftermarket). Actual performance depends on EGT limiter and boost creep.
Installation
Installation
- Flashed at home through the OBD port with the TuneZilla FlashZilla Pro and a Windows 10 or 11 laptop running the TuneZilla Portal App.
- Connect the FlashZilla Pro with a USB-A to USB-C cable. USB-C to USB-C cables are not compatible.
- Your tune is linked to your VIN and syncs to the TuneZilla Portal App, usually right away. Read and save your factory ECU file before flashing.
- Clear all fault codes and warning messages before flashing.
- TuneZilla recommends a battery charger for every flash. Turn the ignition on with the engine off, follow the prompts and do not interrupt the flash.
Supported ECU Hardware Numbers
Supported ECU Hardware Numbers
04L906016AE 8272, 04L906016AE 8416, 04L906016AE 9288, 04L906016AF 8275, 04L906016AF 8417, 04L906016AF 9289, 04L906016AG 9284, 04L906016AH 9285, 04L906016AJ 8273, 04L906016AJ 8418, 04L906016AJ 9286, 04L906016AK 8276, 04L906016AK 8419, 04L906016AK 9287, 04L906016MG 4451, 04L906021C 8277, 04L906021C 8412, 04L906021C 9282, 04L906021CL 8473, 04L906021D 8413, 04L906021D 9283, 04L906021DS 8125, 04L906021DT 5520, 04L906021HG 4448, 04L906021HH 4449, 04L906026BF 1570, 04L997016 9460, 04L997016A 9461, 04L997016B 9468, 04L997016C 9467, 04L997016D 9466, 04L997016E 9465, 04L997022M 9458, 04L997022N 9459
Questions and Answers
Questions and Answers
Don't see your question? Ask us anything about this product.
Ask a Question
2015 VW/Audi 2.0L TDI FlashZilla Stage 3 Tune File

