2022-2024 Cummins EZ-Lynk OBDII Tuning - Available Now

Have questions? We have answers. Dirty Help Center

Introducing our new site Dirty Garage - your source for half-ton parts, off-road, and more.

Welcome to our store. Learn more

Closed Sept 30 for the National Day for Truth and Reconciliation. Back open Thursday, Oct 1.

2014-2025 Cummins Pintop 2.5" Leveling Kit w/ Air Ride (CS-DPT25-LVL-1419-D-AR)

Carli Suspension
$7,090.56 CAD
Notices

This item may have additional freight costs. Learn More

Ships from

  • Canada
    1 available
  • United States Import Fees covered by Dirty
    1 available

Build Your Kit

Review 'Additional Info' for required and optional components

Step 1 of 8 · Optional

Torsion Sway Bar

Maintaining the factory sway bar is only recommended for customers requiring the stiff rate of the factory sway bar - i.e.: those with snow-plows, in-bed campers or who are constantly hauling to the capacity of the truck.

Step 2 of 8 · Optional

Rear Track Bar

The rear axle of the Ram 2500 shifts laterally as it cycles through suspension travel. This rear side-to-side movement, referred to as "yaw", is felt in-cab at the least-opportune times. Our Carli Extended Rear Track Bar can be optioned offering a massive increase in length, and reduction in angle, to effectively eliminate this yaw, resulting in far more composed and predictable handling. Note, with the Leveling Systems, a 1” rear bump drop is required

Step 3 of 8 · Optional

Low Mount Steering Stabilizer

Bolt in steering stabilizer replacing the OEM unit in the factory location. Adjustable from 70-200 psi to run neutral (no directional influence at 70psi) or at 200psi to counter the left-hand pull inherent to tires like Nitto Trail Grapplers. Run in conjunction with the Carli High Mount for the ultimate Dual, Opposing Steering Stabilizer combination that's infinitely adjustable.

Step 4 of 8 · Optional

High-Mount Steering Stabilizer

Bolt in compliment to the Carli Low-Mount Steering Stabilizer. Adjustable from 70-200 psi to run neutral (no directional influence at 70psi) or at 200psi to counter the right-hand pull inherent to tires like Toyo Mud Terrains. This is NOT a primary stabilizer and MUST be run with either a Carli or OEM lower stabilizer in the factory location.

Step 5 of 8 · Optional

Radius Arm Drop Bracket

The Radius Arm Drop Brackets are NOT. A 2.5" Front lift is able to be caster corrected by adjusting the caster-cams all the way to the rear of the truck. If you'd like to correct spring pressure and eliminate potential coil spring bow and maintain full use of your caster adjustment, these Radius Arm Drops should be added.

Step 6 of 8 · Optional

Radius Arm

Icing on the cake, these arms add Limit Strap Protection for your Front Shocks, 1/4" Boxed Steel Construction, Serviceable 17-4 Stainless Spherical Bearings and maintain the factory caster adjustment.

Step 7 of 8 · Optional

Front Differential Guard

Better to have it and not need it than need it and not have it.

Step 8 of 8 · Optional

Lifetime Ball Joints

The last set of ball joints you'll install carrying the industry's best warranty you won't need to use!
Your Build
2014-2025 Cummins Pintop 2.5" Leveling Kit w/ Air Ride (CS-DPT25-LVL-1419-D-AR)
$7,090.56

Purchase to earn 7090  Dirty Dollars Learn More

Truck Fitment

Description

Note: Compatible with Factory Rear Air Suspension ONLY

One of the best off-road suspension systems Carli offers, the Pintop 2.5" leveling kit provides you with an all-around terrific ride over any terrain. No compromises were made with the development of this kit. Featuring Carli-specific, blueprinted, King 2.5” shocks that provide 55% more piston surface area and are the pinnacle of performance and capability. These pintop 2.5 remote reservoir shocks provide more fluid volume and piston movement, which results in improved heat dissipation, consistent damping, and a smoother, more comfortable ride. Fully rebuildable, serviceable, and tuneable for whatever your preference is.

Part Number: CS-DPT25-LVL-1419-D-AR

Features
  • Multi-rate front coil springs, front and rear shock package, rear air ride components, and adjustable track bar
  • For those who love the way their Ram tows from the factory but don't want to be limited to a crawl when leaving the pavement, this is the perfect kit
  • Increases wheel travel to 8.3" front and 9" rear

Questions and Answers

Don't see your question? Ask us anything about this product.

Vehicle Fitment - Part No: CS-DPT25-LVL-1419-D-AR

Loading Fitments...

  • Endless Support

    A team on staff, ready to help before or after your purchase.

  • We sell what we use.

    We only carry the best in Diesel Performance.

  • Canadian. Eh?

    Located in West Kelowna, BC.
Back to top