2022-2024 Cummins EZ-Lynk OBDII Tuning - Available Now

Have questions? We have answers. Dirty Help Center

Introducing our new site Dirty Garage - your source for half-ton parts, off-road, and more.

Welcome to our store. Learn more

Closed Sept 30 for the National Day for Truth and Reconciliation. Back open Thursday, Oct 1.
1 10

2014-2018 Ram 2500 Commuter 3" Lift Kit (CS-D3-COM-CS-14-PW)

Carli Suspension
$5,712.48 CAD
2014-2024 Cummins Rear 1-2" Lift Multi-Rate Coil Springs (CS-DMRC-14-R1) (Coil Spring Type)
Notices

This item may have additional freight costs. Learn More

Ships from

  • CanadaEst. 14 weeks · Secure yours today
    Special order
  • United States Import Fees covered by Dirty
    10+ available

The Details

* Asterisks indicate a required selection.

Carli Suspension Acknowledgement *

This is to confirm you have read and understand that fitment is accurate to your truck, required modifications, if any, and any additional REQUIRED parts needed for proper installation.

Build Your Kit

The perfect comprehensive suspension setup for your 2500, with front linear and rear multi-rate coil springs that provide a slight rear rake and smooth, soft highway driving and a stiffer, more controlled ride on rough terrain or hauling heavy loads. Paired with Carli's 2.0 6063 Aluminum shocks with 6061 Billet rod ends to further maintain stability, control, and provide superior bottom-out protection. Perfect for the daily driver that's sticking to city streets and highways.

Step 1 of 6 · Optional

Rear Track Bar

Needed to complete this build. Skip only if your truck already has one installed. The rear axle of the Ram 2500 shifts laterally as it cycles through suspension travel. This rear side-to-side movement, referred to as "yaw", is felt in-cab at the least-opportune times. We offer two options, a drop bracket to minimize the rear yaw as much as is possible with the short factory track bar, or our Carli Extended Rear Track Bar can be optioned offering a massive increase in length, and reduction in angle, to effectively eliminate this yaw, resulting in far more composed and predictable handling.

Step 2 of 6 · Optional

Sway Bar Options

The Factory Sway Bar Disconnect with which the Power Wagons are equipped works great for those wanting the two ends of the spectrum, rigid or flexy. For those wanting to land in the middle of the spectrum between these two end points, Carli’sTorsion sway bar removes the entire factory sway bar assembly replacing it with a torsion bar supported by fabricated drop brackets and delrin bushings. Fabricated sway bar arms and dual 5/8” FK heim end links round off the package. This is the single best bang for the buck, ride-quality upgrade offered by Carli Suspension when compared to the locked, factory sway bar. The Carli Sway Bar allows nearly bind-free articulation in low-speed applications; when things heat up, it allows the Carli Shocks and springs to breath while engaging progressively to provide control in high-speed cornering situations.

Step 3 of 6 · Optional

Steering Stabilizers

Bolt in steering stabilizer (factory location). Adjustable from 70-200 psi to run neutral (no directional influence at 70psi) or at 200psi to counter the left-hand pull inherent to tires like Nitto Trail Grapplers. Run in conjunction with the Carli High Mount for the ultimate Dual, Opposing Steering Stabilizer combination that's infinitely adjustable.

Step 4 of 6 · Optional

Fabricated Radius Arms

Icing on the cake, these arms add Limit Strap Protection for your Front Shocks, 1/4" Boxed Steel Construction, and Serviceable 3" - 17-4 Stainless Steel Spherical Bearings.

Step 5 of 6 · Optional

Front Diff Guard

Better to have it and not need it than need it and not have it.

Step 6 of 6 · Optional

Lifetime Ball Joints

The last set of ball joints you'll install carrying the industry's best warranty you won't need to use!
Your Build
2014-2018 Ram 2500 Commuter 3" Lift Kit (CS-D3-COM-CS-14-PW)
$5,712.48

Purchase to earn 5712  Dirty Dollars Learn More

Truck Fitment

Description

Note: Not compatible with factory rear air ride trucks or diesel applications. There are differentiating factors between R1 & R2 Coil Springs. Be sure to select the appropriate coil springs best suited to your application

The perfect comprehensive suspension setup for your 2500, with front linear and rear multi-rate coil springs that provide a slight rear rake and smooth, soft highway driving and a stiffer, more controlled ride on rough terrain or hauling heavy loads. Paired with Carli's 2.0 6063 Aluminum shocks with 6061 Billet rod ends to further maintain stability, control, and provide superior bottom-out protection. Perfect for the daily driver that's sticking to city streets and highways. 

Part Number: CS-D3-COM-CS-14-PW

Features
  • Multi-rate front coils, rear coils, front and rear shock package, radius arm drop brackets, adjustable track bar, front and rear bump stop drops, rear sway bar end links, and rear track bar drop
  • Increases wheel travel to 10" front and 11" rear
  • Allows for the fitment of 37" tires

Questions and Answers

Don't see your question? Ask us anything about this product.

Vehicle Fitment - Part No: CS-D3-COM-CS-14-PW

Loading Fitments...

  • Endless Support

    A team on staff, ready to help before or after your purchase.

  • We sell what we use.

    We only carry the best in Diesel Performance.

  • Canadian. Eh?

    Located in West Kelowna, BC.
Back to top