2011-2026 Powerstroke LPK Dipstick Mount (6.7F11-LPK-DSM)

The S&S Diesel Motorsport Dipstick Mount secures the engine oil and transmission dipstick tubes on a 2011-2026 Ford 6.7L Power Stroke running an S&S Fuel Leak Prevention Kit. Some aftermarket intake piping kits push the dipsticks outboard or leave nothing to mount the tubes to, and this kit anchors them to the back of the LPK filter head instead. Hardware for early and late trucks comes in the same kit: 2011 to mid-2014 trucks clamp both tubes with rubber lined P-clips on a bent stainless bracket, while mid-2014 to 2026 trucks bolt the factory welded tab on the engine dipstick tube to a flat stainless bracket.

Part Number: 6.7F11-LPK-DSM

• Mounts the engine and transmission dipstick tubes to the back of the S&S LPK filter head
• 304 stainless steel brackets
• One kit covers 2011 through 2026 model years
• 2011 to mid-2014 hardware uses rubber lined P-clips for trucks without the OEM welded tab on the engine dipstick tube
• Mid-2014 to 2026 hardware uses the OEM welded tab, plus a rubber isolator that joins the transmission tube to the engine tube on mid-2014 to 2019 trucks

• 2011 to mid-2014: bent stainless dipstick bracket, 12mm P-clip (engine dipstick), 18mm P-clip (transmission dipstick), M6x1x20mm socket head cap screw, M6x1 serrated flange nut
• Mid-2014 to 2026: flat stainless dipstick bracket, M6x1x30mm and M6x1x16mm button head cap screws, M6x1 serrated flange nut, rubber vibration isolator with 1/4"-20 studs, (2) 1/4"-20 serrated flange nuts

• Requires an S&S Fuel Leak Prevention Kit to be installed. The bracket mounts to the LPK filter head.
• Only needed with aftermarket intake piping that pushes the dipsticks outboard or does not provide a bracket for the dipstick tubes. Trucks with the OEM intake do not need this kit.
• On 2011 to mid-2014 trucks the bracket mounts with the LPK's own M6x1x30mm filter head bolt, which is not included in this kit.
• 2020 and newer trucks have no transmission dipstick, so the rubber isolator is not used.
• The dipstick tubes or bracket may need slight bending for proper fitment.

Don't see your question? Ask us anything about this product.