2011-2016 Powerstroke 4" 4 Link BDS Conversion Lift Kit (BDS590H)

Fits

This BDS system converts your truck to a 4" lifted 4-Link setup monster! The full replacement 4-Link system is centered around 4 massive control arms featuring greaseable ends and is set up to correct the alignment tire placement inside the wheel well, while reducing caster change through wheel travel creating a more controlled feel both on and off-road. 

Part Number: BDS590H

• 4" ProRide Coil Springs
• 5" Rear Block Kit
• Anti-Sway Bar Drop Brackets
• Forged Dropped Pitman Arm
• Track Bar Relocation Bracket
• Clears 35's
• 4-Link conversion for greater control

Tire & Wheel Combinations:

• 35" x 12.50" w/ 17 x 9 and 4.5"
• 35" x 12.50" w/ 18 x 9 and 4.5"
• 35" x 12.50" w/ 20 x 9 and 4.5"

• Removal of factory block required. Net rear lift height will vary depending on the height of the factory block but will result in a level stance.
• Front exhaust modification may be required to clear the front driveshaft (gas only).
• If equipped with a 2-piece driveshaft, a driveshaft alignment kit may be required.
• Although extremely rare, front and/or rear driveline vibration may occur.
• If equipped with a rear sway bar, #123009 is required.
• U-bolts will not work on dually.
• Although this is pictured with Fox Shocks, this kit will come equipped with BDS Shocks. If you would like fox shocks, please reach out.

• Click Here For Installation Instructions
• Difficulty: 3 (where 1 = easiest and 5 = complicated)