2011-2016 Duramax CP3 Conversion Kit (FPE-LML-CP3-10)
Purchase to earn 3768 Dirty Dollars Learn More
Description
Description
Fits
Year | Make | Model | Engine |
2011-2016 |
GMC/Chevrolet | HD | 6.6L Duramax |
Upgrade your unreliable CP4 pump with Fleece Performance's CP3 Conversion Kit; drastically increasing reliability & fueling capabilities, this pump has whole lot of beneficial features to keep your Duramax running, & reduce the chances of costly failures.
Part Number: FPE-LML-CP3-10
Features
Features
- Heavy Duty CP3 with 10mm displacement cam
- High flow CP3 feed and return fittings
- Preformed feed and return fuel lines
- CP3 to rail high pressure fuel line
- High flow CP3 feed and return fuel fittings
- Preformed feed and return fuel lines
- CP3 mounting adapter
- Dosing injector fuel lines and mounting bracket
- FCA extension harness
- Low pressure fuel feed lines
- Hardware kit
Notes
Notes
- This kit has been tested for use in stock application trucks that did not utilize a fuel lift pump. For optimal performance, if the truck is equipped with a lift pump, the feed pressure to the CP3 should not exceed 2 psi. Engine surging may be induced by the additional fuel pressure of a lift pump operating at pressures over 2 psi. Engine surging may be induced by the additional fuel pressure of a lift pump operating at pressures over 2 psi. If you are intending to combine this kit with a Fleece PowerFlo lift pump, contact Fleece for a lower rate spring for your pump to accommodate operation with this kit. For higher lift pump pressures, FCA table values will require adjustment.
- Covered under SC-E Emissions certificate #: SC-FLC01-0013
Videos
Videos
Questions and Answers
Questions and Answers
Previously asked questions
We've compiled a list of questions and answers below.
Don't see your question? Ask us anything about this product.
Ask a Question-
Does this pump require tuning?
This Conversion Kit for the 2011–2016 LML models does not require tuning for installation. According to Fleece Performance, this kit is designed to be a direct replacement for the factory CP4 pump, and it operates seamlessly with the stock ECM calibration.