2007.5-2010 Deluxe No Bridge / Cold Side Bundle Kit (HSP-D-494-HSP)

Fits

This bundle kit features everything you could need from the HSP Diesel lineup to make more power and get the maximum performance out of your LMM Duramax all while keeping your factory emissions! This bundle kit is perfect for the person looking to do everything you can at one time and who wants to save some money because we do a bundle.

The Billet Thermostat Housing Kit that comes in the Max Air Flow Bundle.

The Hot Side Intercooler Tube that comes in the Max Air Flow Bundle

The Intercooler Tube on the Hot Side is a real pain when it fails - and it fails often. The issue is, that it loves to leak near the lower intercooler boot. Thankfully, HSP Diesel saved the day by nixing the need for that boot and creating a seamless connection at the intercooler. And they didn't stop there - they even upgraded the Tube to a 3" mandrel-bent design. That means more air can fit in there, and with those bends, the flow can improve by up to 40%!

The VGT Intake Mouthpiece that comes in the Max Air Flow Bundle.

The intake on these trucks is so restrictive and not very appealing under the hood. But fear not, HSP Diesel has got your back with the VGT Intake Mouthpiece! Not only does it add some serious style, but it's also handmade in an increased size for better flow and more power. And with an O-ring seal, you won't have to worry about any boost leaks.

The Factory Replacement Coolant Tank that comes in the Max Air Flow Bundle.

• Increased performance
• Maximizes factory parts with emissions intact
• High-flowing cold air intake
• 3" Diameter hot and cold side tubes
• High-strength five-layer silicone boots
• Multiple Powder Coat options available
• Replaces prone to failure factory parts
  

 Includes:

• (1) 3" Mandrel-bent hot side tube
• (1) Cold Air Intake
• (1) VGT intake mouthpiece
• (1) Replacement coolant tank
• (1) Billet thermostat housing kit
• (1) 1.75" Radiator Hose Tube
• (1) 3"x4" Straight Boot
•  (3) 3" T-Bolt Clamp
• (1) 2.25" to 3" Reducer Boot
• (1) 2.25" T- Bolt Clamp
• (1) 4.5" - 4" Reducer Boot
• (1) 4" T-Bolt Clamp
• (1) 4.5" T-Bolt Clamp
• (16") Trim Seal
• (4) 1/2" Worm Gear Clamp
• (1) 1" Worm Gear Clamp
• (14") 1/2" Heater Hose
• (18") 3/8" Heater Hose
• (1) 1.75"x3" Straight Boot
• (1) 1.75"x90 degree Boot
• (4) 1 3/4" Worm Gear Clamps
  

• LMM: 07.5-10 VIN Code 6
• Engine code is dictated by the 8th character of the VIN number. The 10th character is the year of the truck.