2007-2018 Jeep G9 Track Bar Hardware Kit (8050-02)

Fits

This is a Complete Upper/ Lower Control Arm, & Track Bar Hardware Kit; everything you need to stiffen up your axle assembly & prevent unwanted lateral movement on your Jeep.

Part Number: 8050-02

• High strength G9 hardware
• Replaces the Lower Control Arm (LCA) Upper Control Arm (UCA) hardware and specialized nut tabs that get destroyed from wheeling abuse
• Replaces the Rear Track Bar (TB) bolts which often get worn out from service
• Replaces the Front Track Bar Frame Side (TB) bolt on 2012+ JK with a 14mm Grade 10.9 bolt
• Includes hardened extra thick washers that will not deform or contort like Standard washers

Complete Kit Includes Lower Control Arm Track Bar Hardware Kit 8050

• 8 Each 9/16-18 UNFX4.0 inch long G9 bolts (LCAs)
• 4 Each 9/16-18 UNFX3.0 inch long G9 bolts (TBs)
• 12 Each 9/16-18 UNF G9 Stover top lock nuts
• 24 Each 9/16 inch Extra Thick G9 hardened flat washers
• 1 Each M14-2.0X80mm Grade 10.9 bolt (2012+ Front Frame Side Track Bar Bracket)
• 1 Each M14-2.0 GG9 Stover top lock nut

Upper Control Arm Hardware Kit 8050-01

• 4 - 9/16-18 UNFX3.50" long G9 bolts (RUCAs)
• 4 - M12X1.50 85MM (3.50") long GR10.9 bolts (FUCAs)
• 4 - M12X1.50 G9 Stover top lock nuts
• 4 - 9/16" Extra Thick G9 hardened flat washers
• 8 - 1/2" Extra Thick G9 hardened flat washers
• 2 - Rear Upper Control Arm Nut Tab, Frame Side
• 2 - Rear Upper Control Arm Nut Tab, Axle Side

• Click Here