2004.5-2010 Duramax Edge EAS SOTF Adapter (98654)

Fits

Requires: Edge Insight CS2/CTS2/CTS3

No longer do you need to worry about drilling a hole in your dash to install a shift-on-the-fly (SOTF) switch in your Duramax! The new EAS Shift-On-The-Fly switch from Edge lets you plug directly into your CTS2 or CS2 device and switch through your custom tunes on the screen of your insight monitor. 

COMPATIBILITY NOTE: This accessory is designed for use with custom tuning platforms such as EFI Live and EZ-Lynk. Your specific tune file must be built for "Voltage-Based" switching (SOTF/DSP5). It will NOT work with "canned" tunes or tunes that are not specifically configured for a physical switch input at the ECM.

Part Number: 98654

• Change your tunes instantly via the Insight screen
• Replaces the need for a physical DSP5 rotary switch
• Compatible with EFI Live, EZ-Lynk, and other custom tuning (Verify SOTF-indexing with your tuner)
• Clean setup, no drilling holes in your dashboard
• Uses Edge’s Expandable Accessory System (EAS)

1. The EAS SOTF Adapter plugs into your Insight CS2, CTS2, or CTS3 device via the EAS daisy-chain.
2. For the 2004.5-2010 Duramax, this accessory involves pinning wires into the factory ECM harness, exactly as you would with a standard DSP5 switch.
3. Switching occurs by changing the voltage between 1v, 2v, 3v, 4v, and 5v. Most custom-tuned vehicles run within these parameters.
4. Flash the tune into your vehicle that enables the SOTF/DSP5 functions, and enjoy changing power levels on-screen!

• The Duramax EAS accessory connects directly to the ECM harness pins to simulate the resistance levels required for tune switching. It only controls tuning levels that are calibrated to change via this 0-5V analog signal. If your current tune is a "single tune" rather than a DSP5/SOTF multi-tune, this accessory will not increase power levels. Please verify with your custom tune provider that your tune is configured for analog (voltage) switching before purchase.
• Custom tunes created by 3rd-party tuners and/or 3rd-party custom-tuning software are not affiliated with, approved by, or endorsed by Powerteq.