2017-2019 Powerstroke 8" 4-Link Lift Kit (BDS1541H)
Take your new Super Duty to the next level with the tried and true BDS 4-link conversion system. A big upgrade from the factory stamped steel radius arms, these high-strength 4-link conversions offer improved handling, stability, strength, and caster control during wheel travel. Full-length 8" ProRide diesel-specific coil springs are used for the additional ride height paired with BDS NX2 or Fox 2.0 series gas shocks for a smooth ride on any terrain and all-around impressive performance.
Tire & Wheel Combinations:
- 38 x 13.50 w/ 17 x 10 and 5"
- 40 x 13.50 w/ 17 x 10 and 5"
Notes:
- If equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required (BDS123402)
- 40 x 13.50 tires WILL require trimming.
- Transfer case indexing ring will not fit 6.2L vehicles equipped with the 6R100 transmission.
- If your truck is equipped with a factory rear sway bar add: 123009
- The indexing ring has not been designed to work on manual-shift transfer case models. Modification to the shift cable mount will be required.
- Diesel applications only
Installation:
- Click Here For Installation Instructions
- Difficulty: 4 (where 1 = easiest and 5 = complicated)
Part Number: BDS1541H
8" Front Coil Springs
Show more
6" 4-Link Box Kit
This Box Kit includes the following products:
- Upper & Lower 4-Link Arms
- Bolt Pack - 4-link Arm Hardware
- Bag Kit - Upper Arm
- 2 90-degree grease fittings
- 4 1.0 x 0.120 x 3.25 DOM Sleeves
- 8 Bushings
- Cam Lock Plate
Show more
8-bolt DSL Transfer Case Indexing Ring Kit
Show more
8" Front Box Kit
This Box Kit includes the following products:
- Pitman Arm
- Front Bump Stop Extension
- Track Bar Bracket
- Driver & Passenger Side Sway Bar Drop
- Bolt Pack - 4-Link Bracket
- Sway Bar Link Assembly
- Driver & Passenger Side 4-Link Bracket
- BDS Badge
- Rivet Bolt Packs
- 2 Bag Kits
- Track Bar Cam Washer
- Loctite
- Zip Ties
- 1/8" x 1-1/4" Cotter Pin
- CV Joint Boot Clamp
- Bolt Pack - Sway Bar Drop Bracket
- Sway Bar Link Clevis & Sleeve
- Sway Bar Link Clevis
- Bolt Pack - Bump Stop/ Sway Bar
- Driver & Passenger Side Front Brakeline
- Brake Clips
- 3/8" Crush Washer
- Brake Line
Show more
8" Rear Box Kit
This Box Kit includes the following products:
- 4 5/8" x 3-1/8" x 14" Semi-Round U-Bolts
- Rear Brake Line Bracket
- Exhaust Drop Bracket
- Exhaust Hanger
- E-Brake Relocation Bracket
- Bag Kit - Rear Hardware
- 5/8" Washers
- 5/8" High Nuts
- 7/16" x 4" Center Pin w/Nut
- E-Brake Clamp Bracket
- 7/8" SAE Washer
- Bolt Pack - Exhaust Relocation Hardware
- Bolt Pack - E-Brake Relocation
Show more
8" Rear Leaf Springs (2x)
Show more
No Thanks
2" Universal Lift Blocks
Features:
- Blocks are made of cast iron for strength
- Tapered for correct pinion angle
- Sold in pairs
- Black powder coating
Show more
Front NX2 Series Shocks (2x)
The BDS NX2 series gas shocks offer impressive performance on and off-road. Standard in most BDS lift kits, these nitrogen-charged, twin-tube shocks offer 10-stage velocity-sensitive valving for lightning-fast damper performance and control.
Show more
Fox 2.0 Series Shocks (2x)
Improve ride quality and capability with the FOX 2.0 performance series IFP shocks. Specially designed for BDS lift systems, these FOX 2.0 aluminum body shocks offer improved cooling capacity and corrosion protection. These shocks use race-proven vehicle-specific valving along with an internal floating piston (IFP) monotube design to separate the shock oil from high-pressure nitrogen to eliminate aeration and maximize performance on/off-road.
Show more