2013-2018 Ram 1500 w/Air Ride 4" System (BDS1623H)
BDS Suspension 4" System for Ram 1500 4WD w/Air Ride Suspension. This new lift is designed specifically to work with the factory adjustable air ride system available for the 1500 Ram; everything you need to properly lift your truck and no confusion on what you need because all relevant parts and hardware is included in this base kit.
Tire & Wheel Combinations:
- 35" x 12.50" w/ 17 x 9 and 4-1/2"
- 35" x 12.50" w/ 18 or 20 x 9 and 5"
Notes:
- *IMPORTANT*: Due to the complexity of your Rams factory air ride system we highly recommend using an experienced suspension specialist for installation. For help locating a specialist in your area please use our dealer locator or contact us. For information regarding the installation of this system and modifying your Ram's factory air-ride suspension check out our step by step instructions and the helpful tips video below:
- The rack and pinion steering system are extremely sensitive to out-of-round or out-of-balance tire/wheel combinations.
- Fits factory air ride-equipped trucks only.
- The factory air ride is a closed-loop system. Opening the system more times than recommended in the lift instructions or factory service manual will require the system to be recharged. This can be done at any Ram dealer service department.
- Stock 20" wheel can be reinstalled with factory-sized tire only. Stock 17" and 18" wheels will not fit.
- This kit will bolt on Eco-Diesel models but it will require an aftermarket front driveshaft.
Installation:
- Click Here For Installation Instructions
- Difficulty: 6 (where 1 = easiest and 5 = complicated)
Part Number: BDS1623H
This Box Kit includes the following products:
- Rear Track Bar Bracket
- 1 x 1/8” x 1.36” Sleeve
- Driver & Passenger Side Control Arm Relocation
- 2 1” x 1/8” x 2-3/8” Sleeve
- 2 Brakeline Relocation Brackets
- 2 Sway Bar Links
- 4 Sway Bar Link Bushings
- 4 5/8" x 12mm ID x 1-3/8” Sleeve
- 2 Rear Air Bag Spacers
- 2 Shock Nut Tabs
- 2 Bump Stop Extensions
- 2 Bump Stop Nut Plates
- 4 Air Line Fittings
- Driver & Passenger Side Air Sensor Brackets
- Bolt Pack - Air Fittings / Rear Air Bag Spacer
- Bolt Pack - Rear Sway Bar Links
- Bolt Pack - Rear Bump Stops
- Bolt Pack - Rear
Rear Air Ride Box Kit
Show more
This Box Kit includes the following products:
- Driver & Passenger Side Steering Knuckle
- Tie Rod Ends
Front Box Kit
Show more
This Box Kit includes the following products:
- Driver & Passenger Side Steering Knuckle
- Tie Rod Ends
Front Box Kit
Show more
This Box Kit includes the following products:
Front Box Kit
Show more
Front Box Kit
This Box Kit includes the following products:
- HC Front Crossmember
- Front Driver & Passenger Side Differential Drop Bracket
- Rear Driver Side Differential Drop Bracket
- Outer Front Driver Side Differential Drop Bracket
- CV Boot Clamp
Show more
NX2 Series Shocks (2x)
The BDS NX2 series gas shocks offer impressive performance on and off-road. Standard in most BDS lift kits, these nitrogen-charged, twin-tube shocks offer 10-stage velocity-sensitive valving for lightning-fast damper performance and control.
Show more
Fox 2.0 Series Shocks (2x)
Improve ride quality and capability with the FOX 2.0 performance series IFP shocks. Specially designed for BDS lift systems, these FOX 2.0 aluminum body shocks offer improved cooling capacity and corrosion protection. These shocks use race-proven vehicle-specific valving along with an internal floating piston (IFP) monotube design to separate the shock oil from high-pressure nitrogen to eliminate aeration and maximize performance on/off-road.
Show more
