2011-2016 Powerstroke 2.5" Radius Arm Lift Kit (BDS1509H)
If you want to lift your Powerstroke and increase its strength, control, and durability we recommend looking at this 2.5" Radius arm lift kit by BDS Suspension. This new system is built around massive tubular replacement radius arms. These arms are built to handle far more than the factory parts they are replacing. The design incorporates a factory-style rubber bushing mount at the frame to keep the NVH levels in check and mount right into the factory locations so installation is simple and clean.
Tire & Wheel Combinations:
- 35" x 12.50 w/ 17 x 9 and 5"
- 35" x 12.50 w/ 18 x 9 and 5"
- 35" x 12.50 w/ 20 x 9 and 5"
Notes:
- Designed for Diesel models w/o top mounted overload rear springs. Models equipped with a 3-3/4" rear block from the factory do not require a rear block kit in order to achieve a more level stance. For a more tail-high stance, substitute #013519 5" rear block kit.
Installation:
- Click Here For Installation Instructions
- Difficulty: 3 (where 1 = easiest and 5 = complicated)
Part Number: BDS1509H
2.5" Front Box Kit
This Box Kit includes the following products:
- Adjustable Track Bar Assembly
- Adjustable Track Bar Frame End
- Adjustable Track Bar Axle End
- Track Bar Collar
- 4 5/16-18 x 1-1/4 SHCS Clear Zinc
- 1.125 x .156 x 1.745 Sleeve
- 2 Bushings
- Grease Fitting
- Thread Locker
- 2 Brake Line Brackets
Show more
Radius Arm Box Kit
This Box Kit includes the following products:
- 2 Radius Arm Assembly
- Radius Arm
- Radius Arm Bushing
- Rivet Bolt Pack
- BDS Name Plate Badge
- 2 Cam Plates
- M18-2.5 Prevailing Torque Lock Nut
- M18-2.5 x 150mm Bolt
- 2 3/4" SAE Washers
- 6 Zip Ties
- 2 Tree Zip Ties
Show more
Note:
- Some F250/350s come equipped from the factory with a 3-3/4" rear block and do not require a rear block kit to achieve a more level stance. If a more tail high stance is preferred choose the 5" rear block option.
No Thanks
4" Rear Block Kit
This Box Kit includes the following products:
- 2 4" Superduty Rear Blocks
- 4 5/8" x 3-1/8" x 14" Semi-Round U-bolts
- 8 5/8 Fine High Nuts Black E-coat
- 8 5/8 SAE Flat Washers -Black
Show more
5" Rear Block w/ or w/o Overloads
This Box Kit includes the following products:
- 2 5" Rear Super Duty Blocks
- 2 Super Duty Rear Spring Plates
- 4 3/4" x 3-5/8" x 15" Round U-bolts
- 8 3/4" Serrated Edge Flanged Nuts
Show more
NX2 Series Shocks (2x)
The BDS NX2 series gas shocks offer impressive performance on and off-road. Standard in most BDS lift kits, these nitrogen-charged, twin-tube shocks offer 10-stage velocity-sensitive valving for lightning-fast damper performance and control.
Show more
NX2 Series Shocks (2x)
Show more
Fox 2.0 Series Shocks (2x)
Show more
No Thanks
NX2 Series Single Steering Stabilizer
- Will fit stock height vehicles.
Show more
Required if you have selected Single or Dual Steering Stabilizers.
No Thanks
Single Steering Stabilizer Bracket Kit
Show more
BDS RECOIL traction bars are built to the highest standards for the ultimate performance on and off-road. The bars are fabricated from 2'' OD x 3/16'' wall steel tubing with a threaded bung welded in toward the axle and a CNC machined end at the frame. The axle mount uses the tried and true BDS large forged flex end and jam nut to take whatever abuse you throw at it. BDS forged flex ends use a forged housing with a large 1-1/4'' -12 threaded shank, single-sided snap ring, and 1-piece flex ball for up to 15-degrees of misalignment in either direction. At the frame end, the bar uses a durometer-specific polyurethane bushing installed that free floats in the traction bar utilizing dual-stage internal compression springs and UHMW polyurethane bearings. Both ends are greaseable and rebuildable. Fully assembled the RECOIL traction bars are 55'' long and mount to the vehicle using fabricated 1/4'' steel brackets.
No Thanks
Universal Recoil Traction Bar
Show more
The frame brackets install by drilling mounting holes for the brackets while the axle brackets install using a set of u-bolts. The traction bars and mounting brackets use a durable gloss black powder coat finish.
Note:
- Required if you have selected Traction Bar Box Kit
- Bracket kits are vehicle specific
- Will Not Fit Dually Models
- Fits Short Box Models Only
No Thanks
Recoil Traction Bar Mounting Kit
Show more
Need a little extra bumper clearance to fit those new tires? This kit will move your front bumper forward 3/4".
No Thanks
Front Bumper Spacer
Show more