2000-2002 Cummins 2" Coil Spacer Lift Kit (BDS204H_3/4_Ton)
Clean up your 24 Valve 2nd Gen with this BDS 2" leveling kit! This kit comes with two cast Aluminium brackets that bolt right into your upper coil pockets. This direct bolt-on design allows you to retain your factory steering geometry and ride. This kit is perfectly suited to level out your truck to get rid of the factory forward rake.
Tire & Wheel Combinations:
- 33" x 12.50" w/ and 4"
Notes:
- The 8800 GVW version of the 3/4 ton Dodge actually requires a different front shock. You will need to check the GVW of your vehicle to ensure that you get the correct front shocks.
Installation:
- Click Here For Installation Instructions
- Difficulty: 3 (where 1 = easiest and 5 = complicated)
Part Number: BDS204H_3/4_Ton
2" Coil Spacer
This Box Kit includes the following products:
- Steering Knuckle - Standard
- 2 Spacers
- Hardware Pack
- 6 7/16 x 1 3/4” Bolts
- 6 7/16” Lock washerss
Show more
The GVW of the vehicle actually changes the shocks that are needed for this application. The NX² series shocks and the Fox 2.0 performance series gas shocks are both available for vehicles below 8800 GVW or above 8800 GVW.
NX2 Series Shocks - (< 8800) (2x)
Note: Choose this option for NX² series shocks for vehicles with a GVW less than 8800 lbs.
The BDS NX2 series gas shocks offer impressive performance on and off-road. Standard in most BDS lift kits, these nitrogen-charged, twin-tube shocks offer 10-stage velocity-sensitive valving for lightning-fast damper performance and control.
Show more
NX2 Series Shocks - (> 8800) (2x)
Note: Choose this option for NX² series shocks for vehicles with a GVW greater than 8800 lbs.
The BDS NX2 series gas shocks offer impressive performance on and off-road. Standard in most BDS lift kits, these nitrogen-charged, twin-tube shocks offer 10-stage velocity-sensitive valving for lightning-fast damper performance and control.
Show more