1988-1998 6.5L GM 6 lug 6" Lift Kit (6/5 Front/Rear) (BDS193H)
K Series trucks have become the new square body in terms of up-and-coming collectors. Take your K series to the next level and have it stand out around the rest with the BDS 6" Lift Kit. This tightly engineered 6" suspension lift kit is designed around two heavy-duty upper A-arms, one-piece 1/4" laser cut high clearance cross members and replacement steering knuckles. BDS designs their lift kits around keeping the OEM driveability. The combination of heavy-duty upper A-arms, one-piece laser cut high clearance cross member and replacement steering knuckles allows the truck to have zero track width change, proper steering angles, and ball joint angles, all while greatly increasing your ground clearance.
Tire & Wheel Combinations:
- 35" x 12.50" w/ 15 x 8 and 3-5/8"
- 35" x 12.50" w/ 16 or 17 x 8 and 4-1/2"
- 35" x 12.50" w/ 20 x 9 and 5-1/4"
Notes:
- Requires exhaust modification.
- The special tool (Kent Moore Tools Part #J-36202-A) is required to unload/load torsion bars. Not available through BDS.
- Requires frame bracket modification and differential mount modification.
- Not recommended for long box extended cab models due to crossmember interference.
- All models equipped with auto-trac may require a new front driveshaft. The auto-trac New Process 246 transfer case can be identified by the silver dollar-sized plaque on the rear of the transfer case that reads "NP246". The dash-mounted display will display the Auto 4WD symbol. NP243 is not auto-trac.
- Aftermarket wheels are required. (see chart in back)
- The system will not work on some '88-'95 vehicles equipped with spindle-mounted front ABS sensor
- Traction bars will not work on regular cab, short box models.
Installation:
- Click Here For Installation Instructions
- Difficulty: 4 (where 1 = easiest and 5 = complicated)
Part Number: BDS193H
IFS 6" Front Box - (6-Lug)
Show more
IFS Front Box Kit
This Box Kit includes the following products:
- Driver & Passenger Side Steering Knuckle
- Front & Rear Crossmember
- Differential Skid Plate
- Driver & Passenger Side Differential Drop Bracket
- 2 Sway Bar Links
- 2 Sway Bar Mounting Brackets
- 2 0.625 x 0.109 x 1.375 sleeves
- 2 Hourglass Bushings
- 4 Stem Bushings & Washers
- Driver & Passenger Side Upper Control Arm
- 4 0.750 x 0.095 x 2.140 UCA Sleeves
- 2 Brake lines & Clips
- 4 Crush Washers
- Zip Ties
- Differential Drop Bushing
- 0.750 x 0.083 x 2.950 Sleeve
- Driver & Passenger Side Torsion Bar Drop
Show more
IFS Front Box Kit
This Box Kit includes the following products:
- 2 Compression Struts
- 2 Bump Stop Bracket
- 2 Bump Stop
- 2 3/8" nut - coarse thread - non-locking
- 2 3/8" lock washer
- 4 1/8" x 1-1/4" cotter pin
- Rear Brake Line Bracket
- Bolt Pack - Differential Brackets
- Bolt Pack - Sway Bar Links
- Bolt Pack - Compression Struts
- Bolt Pack - Upper Control Arms
- Bolt Pack - Rear Brake Line
- Bolt Pack - Crossmembers
- Bolt Pack - Torsion Bar
Show more
5" Rear Box Kit - (6-Lug)
Show more
5.5" Lift Rear Leaf Spring (2x)
BDS Glide-Ride leaf springs will reduce axle wrap and create a more controlled and stable feel when towing. The actual leaf spring may not be exactly as shown in the photo.
Note:
- Bushings are not included when ordering these leaf springs separately. Order one bushing kit per spring.
Show more
Required if you have selected full Leaf Spring Replacements.
Rear Box Kit
Show more
NX2 Series Shocks (2x)
The BDS NX2 series gas shocks offer impressive performance on and off-road. Standard in most BDS lift kits, these nitrogen-charged, twin-tube shocks offer 10-stage velocity-sensitive valving for lightning-fast damper performance and control.
Show more
Fox 2.0 Series Shocks (2x)
Show more
NX2 Series Shocks (2x)
The BDS NX2 series gas shocks offer impressive performance on and off-road. Standard in most BDS lift kits, these nitrogen-charged, twin-tube shocks offer 10-stage velocity-sensitive valving for lightning-fast damper performance and control.
Show more
Fox 2.0 Series Shocks (2x)
Show more
No Thanks
Universal Recoil Traction Bar
Show more
Standard Series Traction Bar
Reduce rear pinion angle change commonly referred to as axle wrap during acceleration with these BDS heavy-duty traction bars. Tubular design for good looks as well as serious axle control.
Note:
- Requires 4-5.5" rear lift height
- Will not fit regular cab, short box models
- Parts come finished in black powder coat
Show more
Bracket kits are vehicle specific. The frame brackets install by drilling mounting holes for the brackets while the axle brackets install using a set of u-bolts. The traction bars and mounting brackets use a durable gloss black powdercoat finish.
Note:
- Required if you have selected the Recoil Traction Bar.
- Does not fit regular cab models
- Requires 2" rear bump stop extension
No Thanks
Recoil Traction Bar Mounting Kit
Show more
No Thanks
NX2 Series Single Steering Stabilizer
Show more
NX2 Series Dual Steering Stabilizer (2x)
Show more
Required if you have selected Single or Dual Steering Stabilizers.
No Thanks
Single Steering Stabilizer Mounting Bracket
Show more
Dual Steering Stabilizer Bracket Kit
Show more