2004-2007 Powerstroke STC HPOP Fitting Kit (4C3Z-9B246-F)

Description

Fits

The Ford 6.0 STC HPOP Fitting Update Kit 4C3Z-9B246-F was the redesign of the high-pressure oil pump for 2005 and newer Power Stroke diesel engines the "snap-to-connect" or STC fitting used to connect the high-pressure oil pump to the oil supply branch tube has been problematic. The two-piece fittings have a tendency to flex causing wear on the seal and the locking ring resulting in leaks and occasionally the complete separation of the fitting. When a leak occurs at this fitting, the engine may be difficult to start or may not start at all. Depending on the severity of the leak the engine may stall, sometimes abruptly and without warning.

Part Number: 4C3Z-9B246-F

Features

The Ford 6.0 STC HPOP Fitting Update Kit 4C3Z-9B246-F was developed containing a replacement fitting, connector and a bracket that supported the assembly preventing any movement of the branch tube and connector. The Ford 6.0 STC HPOP Fitting Update Kit 4C3Z-9B246-F is effective in preventing STC fitting failures and continues to be an approved repair. Some owners are installing Ford 6.0 STC HPOP Fitting Update Kit 4C3Z-9B246-F as a preventative measure for peace of mind.

• 1 Support Bracket
• 1 Hydraulic Pump Seal Kit
• 1 Branch Tube Adapter - Male
• 1 HPOP Adapter Fitting - Female
• 2 M6 X 35 mm Branch Tube Bolts
• 2 M8 X 60 mm Pump Bolts
• 1 M8 X 45 mm Pump Bolt 

Fitting Update

• The Ford 6.0 STC HPOP Fitting Update Kit 4C3Z-9B246-F is the most current version available to service failed Snap To Connect or Quick Connect fittings on 2005 through 2007 Ford and International trucks.
• The Ford 6.0 STC HPOP Fitting Update Kit 4C3Z-9B246-F works on the following affected engines: International VT-275, International VT-375 Ford 4.5L Power Stroke Ford 6.0L Power Stroke diesel engines.
• This new Ford 6.0 STC HPOP Fitting Update Kit 4C3Z-9B246-F bracket is designed to support the fitting and branch tube and eliminate the possibility of the fitting to become separated.