Description
Fits
| Year |
Make |
Engine |
2003-2004
|
Dodge Ram
|
5.9L Cummins
|
Injector Build Specs: R1/100HP/25% over
The Industrial Injection 0986435503SE-R1 is a 100hp / 25% Over Stage 1 Injector. These have been extrude honed and balanced to a perfect matching set of injectors that flow 30LPM. The Race 1 100HP / 25% Over injectors can be run with a stock turbo but one of their Phatshaft turbos or their compound turbo setups is highly recommended to help reduce EGTs. Industrial Injection typically sees a 1-3MPG increase in fuel economy. They balance the injectors to a tighter tolerance than the original manufacturer and have put a lot of time into making these the best injectors money can buy. All the injectors are built in house with BRAND NEW Factory OEM parts including the nozzles.
Part Number: 0986435503SE-R1
Features
- New internal fuel plungers
- New nozzles/ nozzle springs
- New OE internal & External O Ring kits
- Better Fuel Economy
- 100hp gain / 30LPM / 25% Over
- 1-year Unlimited Mileage Warranty
- A new copper crush washer and o-rings for installation
- OEM Genuine part that is a direct replacement injector
- Each test includes a resistance, system leak, purge, idle speed, mid-load, full load, and static back leak test.
- Each test cycle checks solenoid response time, back leak flow, and fuel delivery.
Notes
- When replacing the injectors in your 5.9L Common Rail, Industrial Injection highly recommends replacing the injector connecting tubes to avoid new injector contamination. The most common failure of new injector installations is contamination and the problem that we see most on these comes from the injector connecting tubes.
- All Industrial Injection products are covered by a one year/unlimited-mile warranty.
